Skip to Content

Eden 1& 1/2 Double Bowl Undermount Sink 340 x 400mm&180 x 400mm (304 Stainless Steel)

Undermount installation required This sink is designed for undermount installation only. Confirm your cabinet and benchtop are suitable before ordering.

A 590mm one-and-a-half bowl undermount kitchen sink in 304 stainless steel with R10 corners. Designed for undermount installation in standard kitchen cabinets.

Size 590mm
Installation Undermount
Material Stainless steel
SKU / Code 44585 / 44585
590.91 590.91
650.00


Barcode: 44585
Barcode 44585

MyDepot product guide

A 590mm one-and-a-half bowl undermount kitchen sink in 304 stainless steel with R10 cor...

A 590mm one-and-a-half bowl undermount kitchen sink in 304 stainless steel with R10 corners. Designed for undermount installation in standard kitchen cabinets.

Size 590mm
Installation Undermount
Material Stainless steel
SKU / Code 44585 / 44585
Quick check before ordering
Confirm your cabinet width can accommodate a 590mm sink. Confirm undermount installation is required and your benchtop type is suitable. Check bowl orientation and which bowl is the larger primary bowl. Check the waste position for compatibility with your plumbing. Confirm included accessories before booking installation.

What is included

Included Product unit only.
Not included Drain kit, mounting clips, cut-out template, tapware and plumbing parts are not included unless stated separately.
Best for Kitchen setups needing a one-and-a-half bowl sink for separate washing and draining tasks.

Measure before you buy

  1. Measure the cabinet width and depth to confirm a 590mm sink will fit.
  2. Check the benchtop cut-out requirements for undermount installation.
  3. Confirm the waste outlet position relative to the cabinet and plumbing.
  4. Allow clearance for typical tap reach and any additional accessories.
  5. Verify all measurements on site before cutting the benchtop.

Complete specifications

Product type Kitchen sink
SKU 44585
Code 44585
Size 590mm
Material Stainless steel
Mounting Undermount
Barcode 44585

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean with a soft cloth and mild detergent or stainless steel cleaner.
  • Avoid abrasive pads, scouring powders or harsh chemicals.
  • Wipe dry after cleaning to maintain the appearance.
  • Pay attention to the R10 corner radius when cleaning.
  • Check and clean the waste regularly.

FAQ

What material is this sink made from?

This sink is made from 304 stainless steel.

What does one and a half bowl mean?

A one and a half bowl sink has two bowls of different sizes. The larger bowl is typically used for washing and the smaller bowl for rinsing or draining.

Does this sink include a waste and mounting hardware?

Check the included items in this listing. If a waste, clips, tapware or plumbing parts are not listed, select them separately.