Skip to Content

Otus Slimline SS Wall Basin Mixer Separate Back Plate Trim Kits in Chrome

Trim Kit Only This product is the trim kit only. The Otus Slimline rough-in body is sold separately and must be ordered to complete the installation.

A wall-mounted basin mixer trim kit in SS304 stainless steel with a pin lever handle. Sold as trim kit only; the rough-in body is purchased separately.

Installation Wall Mounted
Material SS304 Stainless Steel
Finish Chrome
SKU / Code 44364 / 44364
183.64 183.64
202.00

  • Color

Barcode: 44364
Barcode 44364

MyDepot product guide

Otus Slimline SS Wall Basin Mixer Trim Kit in Chrome

A wall-mounted basin mixer trim kit in SS304 stainless steel with a pin lever handle. Sold as trim kit only; the rough-in body is purchased separately.

Installation Wall Mounted
Material SS304 Stainless Steel
Finish Chrome
SKU / Code 44364 / 44364
Quick check before ordering
Confirm your Otus Slimline rough-in body is ordered before fitting. Check the wall cavity and plumbing rough-in positions before installation. Confirm the spout reach suits your basin before ordering. Operating pressure range is 150–500 kPa. Confirm your water pressure falls within this range. Use a licensed plumber for plumbing and final fitting.

What is included

Included Trim kit Handle Back plate Associated hardware for trim plate
Not included Installation service and site preparation are not included unless stated separately.
Best for Bathroom wall basin installations where the Otus Slimline rough-in body is already planned or purchased separately.

Measure before you buy

  1. Check the wall cavity depth and stud spacing for the rough-in body.
  2. Confirm the rough-in body position before purchasing the trim kit.
  3. Measure the spout reach to the basin.
  4. Check water inlet positions for alignment.
  5. Confirm basin and tapware compatibility separately.

Complete specifications

Product type Wall Basin Mixer Trim Kit
SKU 44364
Code 44364
Material SS304 Stainless Steel
Colour / finish Chrome
Mounting Wall Mounted
Barcode 44364

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean only with mild detergent and a soft cloth rinsed with warm water.
  • Do not use abrasive, cream or citrus based cleaners.
  • Do not use cleaners containing chloride or halides.
  • Check the cartridge and seals annually.
  • Damage from incorrect cleaning methods will void warranty.

FAQ

Is the wall mixer rough-in body included?

No. The trim kit and rough-in body are sold separately. The rough-in body must be ordered to complete the installation.

What water pressure does this trim kit require?

The operating pressure range is 150–500 kPa. Confirm your water pressure falls within this range before ordering.

What accessories are included in the box?

The trim kit includes the handle, trim plate, and associated hardware for the plate. The rough-in body, basin, sealant, and installation are not included.

Specifications

Color Chrome