Barcode:
41493
MyDepot product guide
VOG Series Brushed Nickel Wall Mixer With Spout
A solid brass wall mixer with an integrated spout and brushed nickel finish. Designed for clean, minimal bathroom wall installations.
What is included
| Included | Wall mixer body with spout only. |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Bathroom walls where a solid brass wall mixer with integrated spout in brushed nickel suits the renovation style. |
Measure before you buy
- Confirm the wall rough-in allows for wall mixer installation.
- Check the distance between the hot and cold water outlets.
- Verify the wall cavity is prepared before tiling.
- Allow clearance around the spout for hand washing movement.
- Check that wall tiling is complete around the mixer before final installation.
Complete specifications
| Product type | Wall Mixer with Spout |
|---|---|
| SKU | 41493 |
| Code | 41493 |
| Material | Solid Brass |
| Colour / finish | Brushed Nickel |
| Mounting | Wall Mounted |
| Barcode | 41493 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Wipe with a soft damp cloth and dry immediately after cleaning.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals on the brushed nickel surface.
- Do not use bleach or ammonia-based cleaners on the mixer finish.
- Check connections periodically for leaks after installation.
- Use a licensed plumber for connection to water supply lines.
FAQ
Does this wall mixer include the wall unions and washers?
No. Wall unions and washers are not included. Source compatible wall unions separately if needed.
What water pressure does this mixer require?
Water pressure requirements are not listed. Confirm pressure requirements with MyDepot before purchase if your water pressure is outside the standard range.
Can this mixer be installed on a tiled bathroom wall?
Yes. The wall cavity and rough-in must be prepared before tiling, and the tiles should be finished around the mixer body before fitting.