Barcode:
55741
MyDepot product guide
1500mm Electroplated Silver Grills Drain No Outlet
A 1500mm long electroplated silver grills floor drain grate. Designed for tiled shower floors where the waste connection is handled separately.
What is included
| Included | Grills drain grate unit |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Tiled shower floors where a separate waste connection is used and a linear grills drain grate is preferred. |
Measure before you buy
- Measure the finished shower floor width to confirm 1500mm clearance.
- Check the tile bed depth accommodates the 21mm drain profile.
- Confirm the 100mm width suits the installation recess.
- Verify sub-floor waste outlet position is compatible with the chosen configuration.
- Allow adequate fall to the drain after tiling.
Complete specifications
| Product type | Grills floor drain |
|---|---|
| SKU | 55741 |
| Code | 55741 |
| Size | 1500 x 100 x 21mm |
| Colour / finish | Electroplated silver |
| Barcode | 55741 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean the drain grate regularly to prevent soap and debris buildup.
- Use compatible grout or sealant as required by your installer.
- Avoid harsh chemicals that may damage the electroplated finish.
- Do not overtighten during installation.
FAQ
Does this drain have an outlet connection built in?
No. This is a grills drain without a built-in outlet. Your plumber or installer will need to confirm the waste connection method suits your sub-floor plumbing.
What length is this drain?
The drain is 1500mm long, 100mm wide and 21mm high. Confirm these dimensions suit your shower floor before ordering.
Is the grate included?
Yes. The grills grate is included as part of the supplied drain unit.
Specifications
| Color | Silver |