Skip to Content

1500x465x15mm White Marble Look Sintered Stone Top Benchtop

Confirm thickness and basin compatibility before ordering. Thickness is 15mm. Check that your tapware and basin are compatible with this top thickness.

A 1500mm sintered stone benchtop with a white marble look finish. Sized for standard bathroom vanity cabinets.

Size 1500 x 465 x 15mm
Material Sintered Stone
Finish White Marble Look
SKU / Code 90160 / WM1546ST
291.02 549.09
604.00

  • Color

Barcode: 90160
Barcode 90160

MyDepot product guide

A 1500mm sintered stone vanity top with a white marble look finish.

A 1500mm sintered stone benchtop with a white marble look finish. Sized for standard bathroom vanity cabinets.

Size 1500 x 465 x 15mm
Material Sintered Stone
Finish White Marble Look
SKU / Code 90160 / WM1546ST
Quick check before ordering
Confirm the cabinet width and depth match the 1500 x 465mm dimensions. Check that the 15mm thickness suits your tapware and basin requirements. Verify the waste cut-out position before ordering. Confirm the finish matches nearby surfaces.

What is included

Included Product unit only.
Not included Basin, tapware, waste, sealant, and installation are not included unless stated separately.
Best for Bathroom vanity cabinet surfaces where a marble look stone finish is desired.

Measure before you buy

  1. Measure the cabinet width and depth to confirm the 1500 x 465mm top will fit.
  2. Confirm the top thickness suits your tap and basin setup.
  3. Check the waste cut-out position before ordering.
  4. Allow for overhang clearance on the front and sides.
  5. Confirm the surface is level before fitting the top.

Complete specifications

Product type Benchtop
SKU 90160
Code WM1546ST
Size 1500 x 465 x 15mm
Material Sintered Stone
Colour / finish White Marble Look
Barcode 90160

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean with a mild stone-safe cleaner.
  • Avoid acidic or abrasive cleaners that may etch the surface.
  • Seal edges as recommended for wet areas.
  • Support the top fully across the cabinet to avoid cracking.
  • Use suitable sealant around the basin and tap cut-outs.

FAQ

Is this benchtop pre-drilled for tapware?

Check the product listing for tap hole cut-outs before ordering. If not pre-drilled, confirm the cut-out requirements with your installer.

Can this benchtop be used as a kitchen top?

This is listed as a bathroom vanity benchtop. Check the dimensions and finish against your kitchen requirements before ordering.

What cleaners are safe for sintered stone?

Use a mild, pH-neutral cleaner safe for stone surfaces. Avoid acidic or abrasive cleaners that may damage the finish.

Specifications

Color Marble Patterns