Barcode:
56354
MyDepot product guide
1505 x 505 x 18mm Carrara White Marble Curve Stone Top.
A 1505 x 505 x 18mm curve stone vanity top in Carrara White Marble. Cut to suit bathroom vanity cabinets at standard widths.
What is included
| Included | Stone top unit only. |
|---|---|
| Not included | Basin, vanity cabinet, tapware, waste, trap, adhesive, sealant and installation are not included. |
| Best for | Bathroom vanity cabinets at standard widths where a marble-effect stone surface is preferred. |
Measure before you buy
- Measure the cabinet width and depth to confirm the top will fit.
- Confirm the cut-out position for basin or tap if required.
- Check the stone top thickness against the vanity edge height.
- Verify the waste placement and plumbing alignment before installation.
- Allow a small gap around the edges for adhesive and sealing.
Complete specifications
| Product type | Stone Vanity Top |
|---|---|
| SKU | 56354 |
| Code | 56354 |
| Size | 1505 x 505 x 18mm |
| Material | Carrara White Marble |
| Colour / finish | Carrara White |
| Barcode | 56354 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a soft cloth and pH-neutral stone cleaner only.
- Avoid abrasive cleaners, acid-based products or scouring pads.
- Reseal the marble surface periodically as per manufacturer recommendations.
- Protect the edges during handling to prevent chipping.
FAQ
Does this stone top come with a basin cut-out?
Check the listing details or confirm with MyDepot before ordering. Basin cut-outs vary by product listing.
What adhesive or sealant is recommended for this stone top?
Use a stone-safe adhesive and neutral-cure silicone sealant. Consult your installer for compatibility with your cabinet material.
Can this stone top be cut to a custom size?
Stone tops can be cut and re-edged by a stonemason, but this may affect the finish warranty. Confirm requirements before ordering the standard size.

