MyDepot product guide
1205x505mm Carrara White Marble Curve Vanity Top
A 1205 x 505mm Carrara White marble vanity top with a curved front profile. Features an 18mm thickness for standard bathroom installations.
Size
1205 x 505 x 18mm
Material
Carrara White Marble
Finish
Carrara White Marble
SKU / Code
56353 / 56353
Quick check before ordering
Confirm vanity cabinet width and depth before ordering.
Check compatibility with your basin and mixer choices.
Confirm whether sealant or adhesive is needed for fitting.
Inspect the surface for damage on delivery before installation.
Confirm cut-out or drilling requirements if your basin is not supplied pre-drilled.
What is included
| Included | Stone vanity top unit only. |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Standard-width bathroom vanity cabinets in renovation or new-build bathroom plans. |
Measure before you buy
- Measure the vanity cabinet width and depth to confirm 1205 x 505mm is the correct size.
- Check the top face dimensions against the cabinet overhang expected.
- Confirm plumbing positions before cutting or drilling.
- Note the 18mm thickness when planning basin and mixer support.
- Verify the top suits single-basin or double-basin configuration as needed.
Complete specifications
| Product type | Stone Vanity Top |
|---|---|
| SKU | 56353 |
| Code | 56353 |
| Size | 1205 x 505 x 18mm |
| Material | Carrara White Marble |
| Colour / finish | Carrara White Marble |
| Barcode | 56353 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a soft cloth and pH-neutral stone cleaner.
- Avoid acidic or abrasive cleaners that may dull the marble surface.
- Seal the surface as recommended for marble in wet areas.
- Protect the surface during installation to prevent chipping or staining.
FAQ
Is this vanity top pre-drilled for a basin waste?
Check with MyDepot to confirm whether the top is pre-drilled or requires a hole to be cut on-site.
Can this top be used with an undermount basin?
A curved stone top can be used with an undermount basin if the cut-out is prepared correctly. Confirm compatibility before ordering.
What adhesive or sealant is recommended for fitting this top?
Use a suitable stone-safe silicone or adhesive as recommended by your installer. Confirm suitability for marble before use.