Skip to Content

560X365X420mm Procida Rimless Wall Faced Floor Pan

Pan Only Cistern, seat, lid, actuator button, pan connector, trap adapter, and installation parts are not included.

A 560 x 365 x 420mm Procida rimless wall faced floor pan for bathroom renovations. Designed for floor mounted installation with a white finish.

Size 560 x 365 x 420mm
Installation Floor mounted
Finish White
SKU / Code 56150 / 56150
530.91 530.91
584.00


Barcode: 56150
Barcode 56150

MyDepot product guide

560x365x420mm Procida Rimless Wall Faced Floor Pan

A 560 x 365 x 420mm Procida rimless wall faced floor pan for bathroom renovations. Designed for floor mounted installation with a white finish.

Size 560 x 365 x 420mm
Installation Floor mounted
Finish White
SKU / Code 56150 / 56150
Quick check before ordering
Confirm S-trap or P-trap requirements and set-out measurements Check the wall cavity depth if using an in-wall cistern Verify water inlet position before installation Use a licensed plumber for pan and plumbing installation Confirm compatible seat and lid before ordering

What is included

Included Floor pan only.
Not included lid is not included unless stated separately.
Best for Bathroom renovations where a Procida rimless wall faced floor pan is specified.

Measure before you buy

  1. Confirm the set-out measurement from the wall to the waste centre.
  2. Check the available wall width against the pan depth.
  3. Verify water inlet position before ordering.
  4. Measure clearances for seat and lid installation.
  5. Check finished floor level before pan placement.

Complete specifications

Product type Toilet pan
SKU 56150
Code 56150
Size 560 x 365 x 420mm
Colour / finish White
Mounting Floor mounted
Barcode 56150

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Use only non-abrasive cleaners on ceramic surfaces.
  • Avoid chemical cleaners that may damage the rimless jet.
  • Check all plumbing connections for leaks after installation.
  • Tighten pan fixings periodically.
  • Use a licensed plumber for installation.

FAQ

What else is needed for this pan to function?

This pan requires a cistern mechanism, compatible seat and lid, and appropriate plumbing connectors. Confirm compatibility before purchasing.

Does this pan suit S-trap or P-trap plumbing?

Confirm the trap type and set-out measurement before ordering. The pan connector or trap adapter must match your existing plumbing configuration.

Can this pan be used with an in-wall cistern?

Yes, this floor pan is designed to work with in-wall cistern systems. Confirm the cistern compatibility and wall cavity depth before installation.