Skip to Content

1800*100*21mm Electroplated Gun Metal Tile Insert Drain No Outlet

A bathroom linear tile insert drain in gunmetal grey electroplated finish. Sized at 1800 x 100 x 21mm with no waste outlet.

Size 1800 x 100 x 21mm
Finish gunmetal grey
SKU / Code 55816 / 55816
916.36 916.36
1,008.00

  • Color

Barcode: 55816
Barcode 55816

MyDepot product guide

1800 x 100 x 21mm electroplated gunmetal grey tile insert drain with no outlet.

A bathroom linear tile insert drain in gunmetal grey electroplated finish. Sized at 1800 x 100 x 21mm with no waste outlet.

Size 1800 x 100 x 21mm
Finish gunmetal grey
SKU / Code 55816 / 55816
Quick check before ordering
Confirm your existing waste outlet position is compatible with this drain body before ordering. Check the drain length fits the available tile opening. Confirm the tile insert depth of 21mm suits your tile and screed setup. Use a licensed plumber for final installation.

What is included

Included Product unit with tile insert grate cover only.
Not included Waste outlet, connection fitting, installation hardware and tradesperson are not included unless stated separately.
Best for Tiled shower or wet area floors where a discreet tile insert drain with no integral outlet is preferred.

Measure before you buy

  1. Measure the length of the available tile opening to confirm the 1800mm drain will fit.
  2. Confirm the 21mm depth suits your tile and substrate setup.
  3. Check the required outlet connection against your existing plumbing layout.
  4. Verify the drain width suits the finished floor cavity.

Complete specifications

Product type bathroom tile insert drain
SKU 55816
Code 55816
Size 1800 x 100 x 21mm
Colour / finish gunmetal grey
Barcode 55816

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Keep the drain channel clear of debris and soap residue.
  • Use non-abrasive cleaners to protect the electroplated finish.
  • Avoid harsh chemicals that may damage the surface coating.
  • Do not use the drain as a mounting point for heavy objects.

FAQ

Does this drain need a separate waste outlet?

Yes. This drain body has no integral waste outlet. You will need to connect it to an existing waste pipe or outlet in your plumbing layout. Confirm compatibility before installation.

Is this drain suitable for tiled floors?

Yes. The 21mm depth is designed to sit within the tile screed layer. Confirm the depth suits your tile and substrate setup before installation.

What finish is this drain?

The drain has an electroplated gunmetal grey finish. Confirm it matches your other bathroom fittings before ordering.

Specifications

Color Gunmetal Grey