Skip to Content

800*100*21mm Electroplated Gun Metal Tile Insert Drain No Outlet

An electroplated gun metal floor drain designed for tiled shower and wet area floors. Features a tile insert style with no outlet for a flush tile-in installation.

Size 800 x 100 x 21mm
Material Electroplated
Finish Gun metal grey
SKU / Code 55811 / 55811
458.18 458.18
504.00

  • Color

Barcode: 55811
Barcode 55811

MyDepot product guide

An 800 x 100 x 21mm electroplated gun metal tile insert drain with no outlet.

An electroplated gun metal floor drain designed for tiled shower and wet area floors. Features a tile insert style with no outlet for a flush tile-in installation.

Size 800 x 100 x 21mm
Material Electroplated
Finish Gun metal grey
SKU / Code 55811 / 55811
Quick check before ordering
Confirm this is the correct length and width for your installation. Check that the no-outlet design matches your waste configuration. Verify the 21mm thickness suits your tile bed depth. Confirm the gun metal finish matches your other fittings. Inspect the drain before tile installation.

What is included

Included Drain unit only.
Not included Installation hardware, sealant and plumbing parts are not included unless stated separately.
Best for Tiled shower and wet area floors where a discreet flush drain is required.

Measure before you buy

  1. Check the length matches your shower floor or wet area opening.
  2. Confirm the width and thickness suit the tile cut-out.
  3. Check that a no-outlet drain suits your plumbing configuration.
  4. Verify subfloor is clean and level before tile and drain installation.
  5. Allow sufficient tile adhesive or mortar bed for the 21mm thickness.

Complete specifications

Product type Tile insert drain
SKU 55811
Code 55811
Size 800 x 100 x 21mm
Material Electroplated
Colour / finish Gun metal grey
Barcode 55811

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Protect the drain surface during tile cutting and installation.
  • Remove debris from the drain after installation and before use.
  • Check with your tiler or plumber that the installation method is suitable for your floor structure.
  • Do not use abrasive cleaners on the electroplated finish.

FAQ

Does this drain have an outlet connection?

No. This drain is a tile insert drain with no outlet and requires a compatible waste configuration for your installation.

Will this drain sit flush with my tiles?

Yes. It is designed as a tile-insert drain to sit flush with tiled floors, using the 21mm thickness to sit within the tile bed.

Is fixing hardware included?

No. Installation hardware is not included. Confirm requirements with your tiler or plumber before installation.

Specifications

Color Gunmetal Grey