Barcode:
55810
MyDepot product guide
600mm Electroplated Gun Metal Tile Insert Floor Drain
A low-profile tile insert drain designed to sit flush with the floor. Water drains through the slots into an existing floor waste below.
What is included
| Included | Drain unit |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Wet areas such as bathrooms and open showers where a low-profile tile insert drain is installed over a compatible floor waste. |
Measure before you buy
- Confirm the 600mm length fits your tile opening.
- Confirm the 100mm width suits your floor waste area.
- Check that the 21mm height suits your tile thickness.
- Verify falls direct water toward the drain slots.
Complete specifications
| Product type | Tile insert floor drain |
|---|---|
| SKU | 55810 |
| Code | 55810 |
| Size | 600 x 100 x 21mm |
| Colour / finish | Electroplated gun metal |
| Mounting | Tile insert |
| Barcode | 55810 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean regularly to keep the insert slots clear of soap and debris.
- Avoid harsh or abrasive cleaning agents to protect the electroplated finish.
- Lift the grate to clear any debris under or around the floor waste.
FAQ
Does this drain have an outlet?
No. This drain has no centre outlet. It sits over an existing floor waste and water drains through the tile insert slots into the floor waste below.
Will water drain properly if there is no outlet?
Yes. Water flows through the tile insert slots into the floor waste below. Confirm your floor waste is correctly installed with adequate falls.
Is the grate removable for cleaning?
Yes. The grate can be lifted for cleaning access.
Specifications
| Color | Gunmetal Grey |