Barcode:
55794
MyDepot product guide
900x100mm Electroplated Gold Tile Insert Drain, 80mm Centre Outlet
An electroplated gold tile insert drain with a flat grid-style flange and a centre outlet positioned 80mm from the edge. Designed to sit flush with floor tiles in wet-room and walk-in shower installations.
What is included
| Included | Drain unit only. |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Tiled wet rooms and walk-in showers where a centre-outlet drain connects to waste plumbing below the tile insert. |
Measure before you buy
- Confirm the 900 x 100mm cut-out suits the tile layout.
- Check that the outlet position aligns with the floor waste plumbing.
- Verify floor depth accommodates the 21mm flange.
- Confirm the outlet spigot diameter matches your waste fitting.
- Check that the drain sits flush with the finished tile surface.
Complete specifications
| Product type | Tile insert drain |
|---|---|
| SKU | 55794 |
| Code | 55794 |
| Size | 900 x 100 x 21mm |
| Colour / finish | Electroplated gold |
| Barcode | 55794 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Use non-abrasive cleaners on the electroplated gold surface.
- Avoid acidic or harsh chemical cleaners that may affect the coating.
- Clean the outlet regularly to maintain water flow.
- Ensure the installer seals around the drain flange to prevent water ingress.
- Confirm the installation meets applicable wet-area building requirements.
FAQ
What is the outlet position for this drain?
The centre outlet is positioned 80mm from the edge of the flange. Confirm this matches your floor waste plumbing before ordering.
Is a waste fitting or hair strainer included?
No. Drainage fittings and hair strainers are not included unless listed separately. Select compatible plumbing parts separately.
What should I confirm before installation?
Confirm the outlet position aligns with your floor waste plumbing, the 900 x 100mm cut-out fits your tile layout, and the subfloor depth accommodates the 21mm flange profile.
Specifications
| Color | Gold |