Skip to Content

800*100*21mm Electroplated Gun metal Grills Drain Centre Outlet 80mm

An electroplated gun metal floor drain with a 80mm centre outlet, designed for tiled shower and wet area floors. Features a grill-style insert for a flush tile-in installation.

Size 800 x 100 x 21mm
Material Electroplated
Finish Gun metal grey
SKU / Code 55713 / 55713
523.64 523.64
576.00

  • Color

Barcode: 55713
Barcode 55713

MyDepot product guide

An 800 x 100 x 21mm electroplated gun metal grill drain with 80mm centre outlet.

An electroplated gun metal floor drain with a 80mm centre outlet, designed for tiled shower and wet area floors. Features a grill-style insert for a flush tile-in installation.

Size 800 x 100 x 21mm
Material Electroplated
Finish Gun metal grey
SKU / Code 55713 / 55713
Quick check before ordering
Confirm the 80mm centre outlet matches your waste pipe size. Check that the length and width suit your shower floor or wet area opening. Verify the 21mm thickness suits your tile bed depth. Confirm the gun metal finish matches your other fittings. Inspect the drain before tile installation.

What is included

Included Drain unit only.
Not included Installation hardware, sealant and plumbing parts are not included unless stated separately.
Best for Tiled shower and wet area floors where an 80mm centre outlet drain is required.

Measure before you buy

  1. Confirm the 80mm centre outlet aligns with your waste pipe position.
  2. Check the length and width suit the tile floor opening.
  3. Verify the 21mm thickness suits your tile bed depth.
  4. Confirm subfloor is clean and level before installation.
  5. Allow sufficient tile adhesive or mortar bed for the 21mm thickness.

Complete specifications

Product type Grill drain
SKU 55713
Code 55713
Size 800 x 100 x 21mm
Material Electroplated
Colour / finish Gun metal grey
Barcode 55713

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Protect the drain surface during tile cutting and installation.
  • Remove debris from the drain after installation and before use.
  • Check with your tiler or plumber that the 80mm outlet is correctly connected.
  • Do not use abrasive cleaners on the electroplated finish.

FAQ

What is the outlet size?

This drain has a 80mm centre outlet. Confirm this matches your waste pipe before ordering.

Will this drain sit flush with my tiles?

Yes. It is designed as a tile-insert drain to sit flush with tiled floors, using the 21mm thickness to sit within the tile bed.

Is fixing hardware included?

No. Installation hardware is not included. Confirm requirements with your tiler or plumber before installation.

Specifications

Color Gunmetal Grey