Skip to Content

560WX350Dmm Bradley Australia Map Satin SS Backrest For AcceSSible Toilet

A wall-mounted backrest with a satin stainless steel finish, sized at 560 by 350mm. Designed for use with an accessible toilet where a grab rail or back support surface is needed.

Size 560 x 350mm
Installation Wall mounted
Material Stainless steel
Finish Satin stainless steel
523.64 523.64
576.00


Barcode: 55692
Barcode 55692

MyDepot product guide

A satin stainless steel backrest for accessible toilet installations.

A wall-mounted backrest with a satin stainless steel finish, sized at 560 by 350mm. Designed for use with an accessible toilet where a grab rail or back support surface is needed.

Size 560 x 350mm
Installation Wall mounted
Material Stainless steel
Finish Satin stainless steel
Quick check before ordering
Confirm the backrest length suits your toilet installation Check wall fixing type and suitable fixings before drilling Confirm compatible accessible toilet pan before ordering Inspect for scratches or damage before installation Use a licensed installer for final fitting

What is included

Included Backrest unit only.
Not included Fixing screws, wall anchors, compatible toilet pan, grab rail hardware and installation are not included.
Best for Accessible toilet installations where a wall-mounted back support surface is specified.

Measure before you buy

  1. Measure the overall backrest length against your toilet installation.
  2. Confirm wall fixing positions before drilling.
  3. Check the projection depth from the wall.
  4. Verify compatibility with the toilet pan model.
  5. Confirm fixing requirements for the wall type.

Complete specifications

Product type Toilet backrest
SKU 55692
Code 55692
Size 560 x 350mm
Material Stainless steel
Colour / finish Satin stainless steel
Mounting Wall mounted
Barcode 55692

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Wipe regularly with a soft cloth and mild cleaner.
  • Avoid abrasive cleaners or scouring pads.
  • Check and tighten fixings periodically.
  • Protect from impact or excessive load.
  • Dry after cleaning to maintain the satin finish.

FAQ

Does this backrest include fixing screws or wall anchors?

No. Fixing screws and wall anchors are not included. Select suitable fixings for your wall type separately.

Is this backrest compatible with any toilet pan?

Check the product listing dimensions and confirm compatibility with your specific toilet pan model before ordering.

What is the projection depth from the wall?

Check the product listing for full dimension details. Confirm the projection suits your toilet installation before ordering.