Skip to Content

New Cora Single Bowl Undermout Sink 540x400mm 304 Stainless Steel

A single bowl undermount kitchen sink designed for installation beneath the benchtop. Suitable for kitchen and laundry use where a discreet, below-counter mounting is preferred.

Size 540 x 400mm
Installation Undermount
SKU / Code 44696 / 44696
370.91 370.91
408.00


Barcode: 44696
Barcode 44696

MyDepot product guide

A 540 x 400mm single bowl undermount kitchen sink.

A single bowl undermount kitchen sink designed for installation beneath the benchtop. Suitable for kitchen and laundry use where a discreet, below-counter mounting is preferred.

Size 540 x 400mm
Installation Undermount
SKU / Code 44696 / 44696
Quick check before ordering
Confirm your cabinet width accommodates the 540mm sink. Check the benchtop cut-out and edge sealing requirements. Confirm bowl orientation and waste position before installation. Check included accessories before booking trades. Use a licensed installer for final fitting.

What is included

Included Sink unit only.
Not included Waste, clips, tapware, sealant, and installation parts are not included.
Best for Kitchen and laundry benchtops where an undermount installation is preferred.

Measure before you buy

  1. Confirm the cabinet internal width can fit the 540mm sink.
  2. Check the required cut-out with your benchtop supplier.
  3. Verify the waste outlet position suits your plumbing.
  4. Confirm the benchtop material can be routed for undermount installation.
  5. Allow adequate clearance for clips and sealing.

Complete specifications

Product type Undermount Kitchen Sink
SKU 44696
Code 44696
Size 540 x 400mm
Mounting Undermount
Barcode 44696

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean with a soft cloth and mild detergent.
  • Avoid acidic or harsh chemical cleaners.
  • Check seal integrity regularly to prevent water damage.
  • Do not use abrasive pads or scourers on any finish.

FAQ

Is a waste fitting included?

No waste fitting is listed. Select a suitable 50mm kitchen waste fitting separately if needed.

What cut-out is required for installation?

Confirm the cut-out size with your benchtop supplier and installer before proceeding. The sink mounts below the benchtop surface.

Does this sink need special care when cleaning?

Avoid acidic or abrasive cleaners. Wipe regularly with a soft cloth and mild detergent.