,230mm%20Depth%20304%20Stainless%20Steel?unique=7b78327&nocache=mydepot_wm_blue_soft)
Barcode:
44550
MyDepot product guide
A 304 stainless steel single bowl kitchen sink with R10 corner for above or undermount...
A single bowl stainless steel kitchen sink made from 304 stainless steel with an R10 corner profile, suitable for above or undermount installation. Designed for kitchens where a durable, corrosion-resistant sink with a clean corner profile is preferred.
What is included
| Included | Sink unit only. |
|---|---|
| Not included | Waste, tapware, cut-out template, mounting hardware, plumbing fittings and installation are not included. |
| Best for | Kitchens needing a durable 304 stainless steel single bowl sink with above or undermount installation. |
Measure before you buy
- Confirm the 230mm depth against your cabinet and plumbing clearance.
- Check the R10 corner radius affects the cut-out size needed.
- Confirm minimum cabinet width for this sink size.
- Check waste position aligns with your plumbing layout.
- Verify the overall dimensions before ordering.
Complete specifications
| Product type | Single Bowl Kitchen Sink |
|---|---|
| SKU | 44550 |
| Code | 44550 |
| Size | 230mm depth (R10 corner profile) |
| Material | Stainless Steel |
| Colour / finish | 304 Stainless Steel |
| Mounting | Above or Undermount |
| Barcode | 44550 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean regularly with a soft cloth and mild detergent.
- Wipe dry after each use to prevent water spotting.
- Avoid abrasive cleaners, steel wool and harsh chemicals.
- Check the rim and mounting seals periodically.
- Protect the sink surface during heavy use.
FAQ
Does this sink include the waste?
No. Waste, tapware, cut-out template and plumbing parts are not included. Select these separately.
Can this sink be installed as an undermount?
Yes. The product is suitable for both above and undermount installation. Confirm with your installer which method suits your benchtops.
What is the R10 corner profile?
The R10 corner has a 10mm radius at the corners. This affects the benchtop cut-out size required. Confirm the cut-out dimensions before cutting.