Barcode:
44342
MyDepot product guide
A tall basin mixer in stainless steel for bathroom vanities.
A highrise basin mixer in SS304 stainless steel with matte black finish. Features a pin lever design and European Kerox 35mm cartridge.
Size
295 x 193 x 220mm
Material
SS304 stainless steel
Finish
Matt black
SKU / Code
44342 / 44342
Quick check before ordering
Confirm the mixer height suits your basin and vanity configuration.
Check the mounting hole diameter and bench thickness.
Verify cold and hot water line positions.
Confirm operating pressure of 150 to 500kPa matches your plumbing.
Use a licensed plumber for installation.
What is included
| Included | Mixer body only. |
|---|---|
| Not included | Installation hardware, water lines, and plumbing fittings are not included unless stated separately. |
| Best for | Bathroom vanities and above-counter basins where a tall mixer is preferred. |
Measure before you buy
- Measure the mixer height from bench to spout outlet.
- Check the mounting hole diameter against the mixer specifications.
- Confirm the reach of the spout over your basin.
- Verify hot and cold line positions before ordering.
- Allow clearance for the pin lever operation.
Complete specifications
| Product type | Highrise basin mixer |
|---|---|
| SKU | 44342 |
| Code | 44342 |
| Size | 295 x 193 x 220mm |
| Material | SS304 stainless steel |
| Colour / finish | Matt black |
| Barcode | 44342 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a mild detergent and soft cloth only.
- Do not use abrasive, cream or citrus-based cleaners.
- Do not use products containing chloride or halides.
- Rinse thoroughly after cleaning.
- Damage caused by incorrect cleaning methods will void warranty.
FAQ
What is the mixer cartridge type?
This mixer uses a European Kerox 35mm cartridge.
What water pressure does this mixer require?
The operating pressure range is 150 to 500kPa.
Does this mixer need special care to maintain the finish?
Use only mild detergent and a soft cloth. Do not use abrasive, cream or citrus-based cleaners or products containing chloride or halides.
Specifications
| Color | Matte Black |