Skip to Content

Clasico Double Towel Rail 800mm in Brushed Nickel

A double-bar towel rail with a brushed nickel finish. Wall mounted design for bathrooms.

Installation Wall Mounted
Finish Brushed Nickel
SKU / Code 44202 / 44202
284.55 284.55
313.00

  • Color

Barcode: 44202
Barcode 44202

MyDepot product guide

Clasico Double Towel Rail 800mm in Brushed Nickel

A double-bar towel rail with a brushed nickel finish. Wall mounted design for bathrooms.

Installation Wall Mounted
Finish Brushed Nickel
SKU / Code 44202 / 44202
Quick check before ordering
Confirm the finish matches nearby bathroom fittings Check fixing position and wall type before installation Confirm dimensions against the available wall space Inspect the item before installation Use suitable fixings for the wall type

What is included

Included Product unit only.
Not included Wall fixings, screws and installation service are not included unless stated separately.
Best for Bathrooms where wall space is limited and two towels need to hang simultaneously.

Measure before you buy

  1. Measure the available wall width between fixing points.
  2. Mark the centre line for both bracket positions before drilling.
  3. Check for pipes and wiring behind the wall surface.
  4. Confirm the rail clears any door swing or shelving.
  5. Measure the projection to ensure clearance from adjacent surfaces.

Complete specifications

Product type Double Towel Rail
SKU 44202
Code 44202
Colour / finish Brushed Nickel
Mounting Wall Mounted
Barcode 44202

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Wipe with a soft cloth and mild cleaner; avoid abrasive products.
  • Dry the rail after cleaning to reduce water marks.
  • Check the wall fixings periodically for tightness.
  • Do not use the rail as a grab rail or load-bearing support.
  • Re-tighten fixings if the rail becomes loose over time.

FAQ

What wall fixings are needed for this towel rail?

This listing covers the rail only. Select suitable wall fixings for your wall type — plaster, tile, or solid wall — and confirm the fixing type before installation.

Can this rail be installed on a tiled wall?

Yes, with appropriate wall anchors suited to tiled surfaces. Use a tile drill bit and take care not to crack the tiles during drilling.

Is the double-bar design suitable for two towels to dry at once?

Yes. The two-bar design allows two towels to hang simultaneously. Confirm the 800mm length suits your towel sizes before ordering.

Specifications

Color Brushed Nickel