Skip to Content

Hali Brushed Nickel Curved Bath Spout Lead Free

Confirm inlet and installation requirements before ordering Bath mixer, water supply, and installation are not included.

A curved bath spout in brushed nickel finish with lead-free waterway. Designed to fill a bath where spout reach and spread matter.

Material Lead free
Finish Brushed nickel
SKU / Code 43226 / 43226
119.09 119.09
131.00

  • Color

Barcode: 43226
Barcode 43226

MyDepot product guide

A curved bath spout in brushed nickel for bath fill installations.

A curved bath spout in brushed nickel finish with lead-free waterway. Designed to fill a bath where spout reach and spread matter.

Material Lead free
Finish Brushed nickel
SKU / Code 43226 / 43226
Quick check before ordering
Confirm bath mixer type — this is a fixed bath spout, not a diverter. Check the inlet thread size and type before installation. Confirm the spout reach suits your bath width and tap position. Verify water pressure and flow rate suit a bath fill application. Check wall fixing and seal requirements for the installation type.

What is included

Included Bath spout unit only.
Not included Water supply lines, bath mixer, diverter, installation hardware, and plumber's tape are not included unless stated.

Measure before you buy

  1. Measure from the tap inlet position to the bath water area to confirm adequate reach.
  2. Check the inlet thread — standard is G 1/2.
  3. Confirm the spout spread aligns with the bath fill point.
  4. Measure wall clearance and any protruding tiles that affect the seal.
  5. Check the finished wall surface to inlet alignment.

Complete specifications

Product type Curved bath spout
SKU 43226
Code 43226
Material Lead free
Colour / finish Brushed nickel
Barcode 43226

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean with a soft cloth and mild detergent. Avoid abrasive or acid-based cleaners on the brushed nickel surface.
  • Check the spout inlet seal periodically for wear.
  • Do not use the spout as a grab point.
  • Use plumber's tape on the threaded inlet to prevent leaks at the wall.
  • Have a licensed plumber install or adjust the spout.

FAQ

Does this spout suit any brand of bath?

This spout is a standard threaded inlet fitting. Confirm the inlet size and reach suit your bath before ordering. A curved profile affects the spread and fill direction.

What is included in the box?

This listing is for the bath spout unit only. Water supply lines, washers, plumber's tape, and installation parts are not included.

Does this spout have a diverter built in?

No. This is a fixed curved bath spout for bath fill. A separate bath diverter or mixer is required to direct water between the bath and shower.

Specifications

Color Brushed Nickel