?unique=eb59af0&nocache=mydepot_wm_blue_soft)
Barcode:
43062
MyDepot product guide
Single bowl undermount kitchen sink in 304 stainless steel.
A single bowl undermount kitchen sink in 304 stainless steel. Designed for kitchen cabinet installations where the sink mounts beneath the benchtop.
What is included
| Included | Sink and basket waste only. Cut-out template included. Rubber seal and mounting clips not included. |
|---|---|
| Not included | Rubber seal, mounting clips, tapware, waste fittings and installation are not included unless stated. |
| Best for | Kitchen benchtops where a single bowl undermount sink in stainless steel is required. |
Measure before you buy
- Confirm the 445 x 395mm bowl dimensions suit your benchtop cut-out.
- Verify the 180mm bowl depth suits your cabinet and plumbing configuration.
- Allow clearance for the undermount fixing brackets.
- Check the waste position aligns with your plumbing tail piece.
- Confirm the benchtop material is compatible with undermount installation.
Complete specifications
| Product type | Undermount Kitchen Sink |
|---|---|
| SKU | 43062 |
| Code | 43062 |
| Size | 445 x 395 x 180mm |
| Material | 304 Stainless Steel |
| Colour / finish | 304 Stainless Steel |
| Mounting | Undermount |
| Barcode | 43062 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Rinse and dry the sink after each use to prevent water marks.
- Avoid steel wool or abrasive pads on the steel surface.
- Use a stainless steel cleaner periodically to maintain the finish.
- Tighten the basket waste periodically to prevent leaking.
- Do not use harsh chemicals or bleach-based cleaners on the sink.
FAQ
Are rubber seal and mounting clips included?
No. Rubber seal and mounting clips are not included. Select these separately if required for your installation.
Do I need to confirm the cut-out size before installation?
Yes. A cut-out template is included. Confirm the template dimensions match your benchtop and cabinet before cutting.
What is the steel thickness?
The steel is 0.8mm thick. This is suitable for light domestic kitchen use. Heavy commercial use may require a thicker gauge.