?unique=6f54279&nocache=mydepot_wm_blue_soft)
Barcode:
43031
MyDepot product guide
A narrow undermount kitchen sink in 304 stainless steel for compact layouts.
A narrow undermount sink in 304 stainless steel with a 240 x 440mm bowl suited to single-bowl kitchen or laundry layouts where space is tight. Basket waste and cut-out template are included.
What is included
| Included | Basket waste and cut-out template. |
|---|---|
| Not included | Tapware, plumbing fittings, sealant, and installation are not included. |
| Best for | Compact single-bowl kitchen or laundry layouts where a narrow undermount sink is needed. |
Measure before you buy
- Measure the cabinet interior width and depth before ordering.
- Confirm benchtop cut-out dimensions using the included template.
- Check that the waste position aligns with your cabinet configuration.
- Allow clearance for undermount clips and sealant around the rim.
- Always use the physical product measurements for cut-outs as the manufacturer's template may differ over time.
Complete specifications
| Product type | Undermount sink |
|---|---|
| SKU | 43031 |
| Code | 43031 |
| Size | 240 x 440 x 200mm |
| Material | 304 stainless steel |
| Colour / finish | 304 stainless steel |
| Mounting | Undermount |
| Barcode | 43031 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Rinse and dry the sink after each use to prevent water marks.
- Avoid abrasive or bleach-based cleaners on stainless steel surfaces.
- Do not use steel wool or harsh scouring pads.
- Check the basket waste regularly and remove debris to maintain drainage.
- Avoid dropping heavy or sharp objects into the bowl.
FAQ
Is the basket waste included?
Yes. A basket waste is included with this sink.
Does this sink come with a cut-out template?
Yes. A cut-out template is included. Always use the physical product measurements for cut-outs as the manufacturer's template may differ from actual dimensions over time.
What is the thickness of the stainless steel?
The steel thickness is 0.8mm. Use the included template and physical measurements to confirm the cut-out before installation.