?unique=412a238&nocache=mydepot_wm_blue_soft)
Barcode:
42052
MyDepot product guide
Muses Brushed Silver Ezy Flow Floor Grate 100x100x26mm
A 100 x 100 x 26mm floor grate with a Brushed Silver finish and 80mm waste outlet. Designed for bathroom floor drainage where an 80mm outlet is specified.
What is included
| Included | Product unit only. |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Bathroom floor drainage installations where an 80mm waste outlet is required. |
Measure before you buy
- Check that the waste outlet is 80mm diameter at the connection point.
- Confirm the floor cut-out is suitable for the 100 x 100mm grate.
- The grate can be trimmed on-site to suit smaller openings.
- Verify floor level and slope for effective drainage.
- Check overall height of 26mm against finished floor thickness.
Complete specifications
| Product type | Floor Grate |
|---|---|
| SKU | 42052 |
| Code | 42052 |
| Size | 100 x 100 x 26mm |
| Colour / finish | Brushed Silver |
| Barcode | 42052 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a soft cloth and mild non-abrasive cleaner.
- Avoid acidic or harsh chemical cleaners that may affect the Brushed Silver surface.
- Rinse thoroughly after cleaning.
- Inspect and clear the waste regularly to maintain flow.
- Do not use abrasive scouring pads or harsh chemicals on the finish.
FAQ
What is the difference between the grate size and the waste outlet size?
The grate is 100 x 100mm. The waste outlet that connects to the plumbing is 80mm. These are two separate measurements. Confirm the 80mm outlet size matches your plumbing before ordering.
Can the floor grate be trimmed or cut down?
The grate is designed to suit openings up to 5600mm in length. It can be trimmed on-site to suit smaller floor openings if required.
What tools or parts do I need for installation?
You will need a licensed plumber to connect the grate to your waste plumbing. Confirm that your waste pipe is the correct 80mm diameter and that the floor structure is prepared before fitting.