Skip to Content

100*100*21mm Muses Brushed Nickel Ezy Flow Floor Grate(Maximum 5600mm,80mm Waste)

A 100 x 100 x 21mm Ezy Flow floor grate in brushed nickel finish with an 80mm waste outlet. Suitable for use in tiled shower areas.

Size 100 x 100 x 21mm (extends to 5600mm)
Finish Brushed nickel
SKU / Code 42046 / 42046
87.27 87.27
96.00


Barcode: 42046
Barcode 42046

MyDepot product guide

100x100x21mm Muses Brushed Nickel Ezy Flow Floor Grate

A 100 x 100 x 21mm Ezy Flow floor grate in brushed nickel finish with an 80mm waste outlet. Suitable for use in tiled shower areas.

Size 100 x 100 x 21mm (extends to 5600mm)
Finish Brushed nickel
SKU / Code 42046 / 42046
Quick check before ordering
Confirm the waste outlet matches the 80mm grate inlet Check the sub-floor waste position before ordering Confirm the maximum 5600mm length suits the shower area Verify the 21mm grate height suits your tile floor setup Confirm compatibility with your tiled shower floor

What is included

Included Floor grate unit only.
Not included Installation service and site preparation are not included unless stated separately.
Best for Tiled shower areas where a linear floor drain is preferred.

Measure before you buy

  1. Measure the sub-floor waste outlet diameter before ordering.
  2. Confirm the waste outlet is the correct size for the 80mm grate inlet.
  3. Measure the overall shower floor length the grate needs to cover.
  4. Check the 21mm grate height against your floor build-up.
  5. Confirm the 5600mm maximum length is sufficient for the shower area.

Complete specifications

Product type Floor grate
SKU 42046
Code 42046
Size 100 x 100 x 21mm (extends to 5600mm)
Colour / finish Brushed nickel
Barcode 42046

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean regularly to prevent soap and debris build-up in the grate.
  • Use a mild cleaning solution suitable for bathroom fixtures.
  • Avoid harsh or abrasive cleaners that may damage the brushed finish.
  • Check the grate periodically to keep the flow channel clear.
  • Remove any collected debris from the grate channel as needed.

FAQ

Does this floor grate include the waste outlet?

No. The grate is the floor visible component only. The sub-floor waste must be selected separately and must suit the 80mm inlet size.

Can this grate be cut to a shorter length?

Check with your installer before modifying the grate. Altering the length may affect how it sits over the waste outlet and drainage performance.

What type of installation is this grate suitable for?

The grate sits over a sub-floor waste outlet in a tiled shower area. Confirm your waste position and floor setup before ordering.