Skip to Content

360*360*125mm Matte Black Above Counter Basin(32mm Nonoverflow)

Confirm waste fitting before ordering This basin has a 32mm non-overflow waste hole. A compatible waste fitting is not included.

A sleek square above counter basin in matte black ceramic. Ideal for smaller bathrooms and powder rooms.

Size 360 x 360 x 125mm
Installation Above counter
Material Ceramic
Finish Matte black
434.55 434.55
478.00


Barcode: 41661
Barcode 41661

MyDepot product guide

360mm Square Matte Black Above Counter Basin

A sleek square above counter basin in matte black ceramic. Ideal for smaller bathrooms and powder rooms.

Size 360 x 360 x 125mm
Installation Above counter
Material Ceramic
Finish Matte black
Quick check before ordering
Confirm your 32mm waste fitting is non-overflow compatible. Check counter width and depth are sufficient for a 360mm square basin. Review counter cut-out and basin positioning before installation.

What is included

Included Basin unit
Not included Installation service is not included unless stated separately.
Best for Small bathrooms and powder rooms where a matte black above counter basin is preferred.

Measure before you buy

  1. Confirm counter width and depth clearance for a 360mm square basin.
  2. Check the counter cut-out and positioning for the waste hole.
  3. Verify compatibility with your 32mm waste fitting.
  4. Allow clearance for tap installation behind or beside the basin.

Complete specifications

Product type Above counter basin
SKU 41661
Code 41661
Size 360 x 360 x 125mm
Material Ceramic
Colour / finish Matte black
Mounting Above counter
Barcode 41661

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Avoid abrasive or acidic cleaners that may damage the matte black surface.
  • Wipe water away regularly to prevent mineral marks on the matte finish.
  • Check the basin surface for any chips before installation.
  • Take care not to over-tighten any waste fitting during installation.

FAQ

Is a waste fitting included with this basin?

No waste fitting is included. This basin requires a compatible 32mm non-overflow waste.

Will a standard 32mm waste fitting work with this basin?

This basin has a 32mm waste hole and no overflow channel. Use a 32mm non-overflow pop-up waste or one compatible with a non-overflow basin.

Does this basin require a specific tap setup?

Above counter basins typically need a tall basin mixer or wall-mounted tap. Check the basin rim height and your counter depth before selecting tapware.