Round%20Corner%20Stainless%20Steel%20Gun%20Metal%20Grey%20PVD%20Coating%20Single%20Bowl%20Kitchen%20Sink(With%20Bottom%20Grid)%20600*450*300mm?unique=412a238&nocache=mydepot_wm_blue_soft)
Barcode:
41556
MyDepot product guide
Gun Metal Grey PVD Single Bowl Kitchen Sink
A modern single bowl kitchen sink featuring a durable gun metal grey PVD coating. Designed with rounded corners for easier cleaning.
What is included
| Included | Sink unit Bottom grid |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Standard kitchen cabinets requiring a deep, wide single bowl sink with a modern matte finish. |
Measure before you buy
- Confirm your cabinet interior width accommodates the 600mm sink width.
- Check that the 450mm depth suits your base cabinet and clearance needs.
- Allow adequate height clearance for the 300mm bowl depth.
- Confirm the waste outlet position matches your plumbing.
- Check tap hole drilling requirements before ordering a mixer.
Complete specifications
| Product type | Single Bowl Kitchen Sink |
|---|---|
| SKU | 41556 |
| Code | 41556 |
| Size | 600 x 450 x 300mm |
| Material | Stainless Steel |
| Colour / finish | Gun Metal Grey PVD |
| Barcode | 41556 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a soft cloth and mild soapy water.
- Avoid abrasive cleaners, scouring pads or steel wool on the PVD coating.
- Rinse and dry after each use to maintain the finish.
- Do not use harsh chemicals or bleach-based cleaners.
FAQ
What are the benefits of the PVD coating?
The gun metal grey PVD coating provides a modern matte appearance that is more resistant to scratches, stains, and fingerprints compared to standard finishes.
Why choose a round corner design?
Rounded corners create a contemporary look and make the sink easier to clean by eliminating sharp 90-degree angles where debris can collect.
What cabinet size is needed for this sink?
The sink width is 600mm. A cabinet with a minimum 700mm internal width is typically recommended. Please confirm with your cabinetmaker.