Barcode:
41473
MyDepot product guide
A brushed nickel toilet bidet spray kit with stainless steel hose.
A toilet bidet spray in ABS plastic with a stainless steel hose and brushed nickel finish. Rated to Australian Standard with a 2 year warranty.
What is included
| Included | Bidet spray head and stainless steel hose. |
|---|---|
| Not included | Water stop tap, angle valve, mounting hardware, and installation parts are not included unless listed separately. |
| Best for | Targeted wash use in Australian toilet installations with compatible plumbing. |
Measure before you buy
- Confirm the water inlet position relative to the toilet.
- Check the hose reach is sufficient from inlet to spray position.
- Measure the mounting height of the spray holder above the toilet.
- Verify the bidet can be positioned without obstruction.
- Allow clearance for the spray head to move freely.
Complete specifications
| Product type | Bidet spray kit |
|---|---|
| SKU | 41473 |
| Code | 41473 |
| Size | 150 x 33.7mm |
| Material | ABS |
| Colour / finish | Brushed Nickel |
| Barcode | 41473 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- After each use, turn off the water stop tap or angle valve to prevent pressure buildup.
- Periodically check the hose and connections for leaks.
- Wipe the spray head with a soft damp cloth.
- Avoid abrasive or acidic cleaners that may damage the brushed nickel finish.
- Replace worn washers or hoses if any leakage is detected.
FAQ
What is included with this bidet spray kit?
This listing includes the bidet spray head and stainless steel hose. A water stop tap or angle valve is required for installation and is not included unless listed separately.
How do I operate the bidet spray safely?
After using the sprayer, always turn off the mini water stop tap or angle valve to prevent pressure buildup, which could lead to leaks over time.
What connection size does this require?
Confirm the connection size and water inlet type against your plumbing before ordering. A standard 1/2 inch connection is common for Australian installations.