Skip to Content

300*100*26mm Lauxes Aluminium Slimline Tile Insert Matte Yellow Gold

A Lauxes aluminium tile insert floor drain with matte yellow gold finish, suitable for bathroom and wet area floors. Anodised aluminium construction with a top grate that rolls out for easy cleaning.

Size 300 x 100 x 26mm (cut to size)
Material Anodised Aluminium
Finish Matte Yellow Gold
SKU / Code 41445 / 41445
82.73 82.73
91.00

  • Color

Barcode: 41445
Barcode 41445

MyDepot product guide

A tile insert floor drain with a flush-mount fit for wet areas.

A Lauxes aluminium tile insert floor drain with matte yellow gold finish, suitable for bathroom and wet area floors. Anodised aluminium construction with a top grate that rolls out for easy cleaning.

Size 300 x 100 x 26mm (cut to size)
Material Anodised Aluminium
Finish Matte Yellow Gold
SKU / Code 41445 / 41445
Quick check before ordering
Confirm the tray and grate will sit flush with your finished floor surface Check that the waste outlet diameter matches your plumbing Review the cutting guide before sizing the grate

What is included

Included Product unit only.
Not included Installation service, waste fittings, cutting tools and site preparation are not included unless stated separately.
Best for Bathroom and wet area floors where a flush tile insert drain is preferred.

Measure before you buy

  1. Cut the bottom tray 3mm shorter than the desired length to allow end caps to be fitted.
  2. Cut the top grate 1mm shorter than the bottom tray to allow easy roll-in fitting.
  3. Position the waste outlet along the tray before cutting.
  4. Confirm the finished floor surface height before installation.

Complete specifications

Product type Tile Insert Floor Drain
SKU 41445
Code 41445
Size 300 x 100 x 26mm (cut to size)
Material Anodised Aluminium
Colour / finish Matte Yellow Gold
Barcode 41445

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Roll out the top grate for regular cleaning underneath.
  • Use a soft cloth and mild cleaner to maintain the finish.
  • Avoid harsh chemicals or abrasive pads on the anodised surface.
  • Re-fit the end caps securely after cleaning to seal the cut ends.

FAQ

Does this tile insert drain include the waste fitting?

No. Check the included items in this listing. Waste, clips and plumbing parts are selected separately.

How do I cut this drain to size?

Use a compound mitre saw fitted with a multi-material cutting blade of 80 teeth or more. Cut the bottom tray 3mm shorter than the desired length, then cut the top grate 1mm shorter than the tray.

Specifications

Color Brushed Gold