Barcode:
41164
MyDepot product guide
A 6-bar brushed nickel electric heated towel rack in stainless steel.
A 6-bar electric heated towel rack with a stainless steel body and brushed nickel PVD finish. Rated IP55 with a built-in on/off switch.
What is included
| Included | Heated towel rack unit with 1.2m power cord. |
|---|---|
| Not included | Installation service, electrical wiring parts and wall fixings are not included. |
| Best for | Warming towels in bathrooms where dry, warm towels are wanted. |
Measure before you buy
- Measure the overall dimensions of 620 x 600 x 122mm against the wall space.
- Check the centre-to-centre mounting hole spacing.
- Confirm wall stud positions for secure fixing.
- Verify the 122mm projection from the wall does not obstruct nearby fixtures.
- Confirm a 3-pin power outlet is accessible after installation.
Complete specifications
| Product type | Electric heated towel rack |
|---|---|
| SKU | 41164 |
| Code | 41164 |
| Size | 620 x 600 x 122mm |
| Material | Stainless steel |
| Colour / finish | Brushed nickel |
| Mounting | Wall mounted |
| Barcode | 41164 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a soft damp cloth. Do not use abrasive cleaners on the brushed nickel PVD finish.
- Keep the on/off switch dry. Do not spray water directly at the switch.
- Check mounting brackets are secure periodically.
- Do not drape soaking wet towels directly on the bars.
FAQ
Does this towel rack need to be hardwired by an electrician?
This model comes with a 1.2m power cord for plugging into a standard 3-pin grounded outlet. The power line can be installed exposed or concealed.
How long does the rack take to warm up?
The rack takes approximately 18 to 22 minutes to reach full warmth depending on ambient room temperature. The thermostat holds a constant temperature of around 55 degrees Celsius.
Can the power cable be installed on either side?
Yes. The power cable can be installed on the left or right side, and the rack can be mounted upside down if needed.
Specifications
| Color | Brushed Nickel |