Skip to Content

Brushed Nickel Square Electric Heated Towel Rack 6 Bars

A six-bar electric heated towel rack in stainless steel with a brushed nickel finish. Rated IP55 for bathroom use.

Size 674 x 620 x 120mm
Installation Wall mounted
Material Stainless steel
Finish Brushed nickel
958.18 958.18
1,054.00

  • Color

Barcode: 41161
Barcode 41161

MyDepot product guide

A wall-mounted electric heated towel rack in brushed nickel for bathrooms.

A six-bar electric heated towel rack in stainless steel with a brushed nickel finish. Rated IP55 for bathroom use.

Size 674 x 620 x 120mm
Installation Wall mounted
Material Stainless steel
Finish Brushed nickel
Quick check before ordering
Confirm the rack dimensions fit your available wall space Check wall fixing strength before installation Confirm power supply and outlet position with a licensed electrician Confirm left or right plug side before ordering Verify the electrical circuit is suitable for 220 to 240V operation

What is included

Not included Power cord, plug, and electrical connection are not included unless confirmed at time of purchase.
Best for Bathrooms and laundries where warm, dry towels are wanted and wall fixing is possible.

Measure before you buy

  1. Measure the available wall width, height and depth for the rack.
  2. Confirm the mounting position clears nearby walls and obstacles.
  3. Check the distance from the nearest power outlet.
  4. Verify the left or right cord entry side suits your installation.
  5. Confirm cabinet or vanity clearance if installing above a vanity.

Complete specifications

Product type Electric heated towel rack
SKU 41161
Code 41161
Size 674 x 620 x 120mm
Material Stainless steel
Colour / finish Brushed nickel
Mounting Wall mounted
Barcode 41161

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Use a damp soft cloth to clean the rack. No detergents or chemicals.
  • Ensure the rack is installed by a licensed electrician.
  • Do not exceed the rated voltage of 220 to 240V.
  • Avoid abrasive cleaners or scouring pads on the finish.
  • Do not install in fully enclosed areas without ventilation.

FAQ

Does this heated towel rack need an electrician to install?

Yes. The rack must be installed by a licensed electrician. Confirm your power outlet position and voltage rating before installation.

Can the power cord be concealed rather than exposed?

The rack can be installed with an exposed cord or a concealed cord. Confirm your preference and electrical configuration before ordering.

What is the IP rating and is this suitable for a wet bathroom?

The rack is rated IP55, which indicates protection against water splash from any direction. It is suitable for typical bathroom installation.

Specifications

Color Brushed Nickel