Skip to Content

Single Bowl Sink 490 x 440mm(304 Stainless Steel)

Compact 304 stainless steel single bowl sink measuring 490 x 440 x 180mm. Includes basket waste and cut-out template; mounting clips and rubber seal sold separately.

Size 490 x 440 x 180mm
Installation Topmount / Undermount / Inset (Check installation requirements)
Material 304 Stainless Steel
Finish Stainless Steel
280.00 280.00
308.00


Barcode: 43017
Barcode 43017

MyDepot product guide

Single Bowl Kitchen Sink 490 x 440mm 304 Stainless Steel

Compact 304 stainless steel single bowl sink measuring 490 x 440 x 180mm. Includes basket waste and cut-out template; mounting clips and rubber seal sold separately.

Size 490 x 440 x 180mm
Installation Topmount / Undermount / Inset (Check installation requirements)
Material 304 Stainless Steel
Finish Stainless Steel
Quick check before ordering
Confirm cabinet width and benchtop cut-out requirements. Check bowl orientation, waste position and tap hole requirements. Confirm topmount, undermount or inset installation requirements. Check included accessories before booking installation.

What is included

Included Product unit Basket waste Cut-out template
Not included Installation service and site preparation are not included unless stated separately.
Best for Standard single-bowl kitchen setups where one large bowl covers daily washing, rinsing, and food preparation needs.

Measure before you buy

  1. Confirm the benchtop cut-out and cabinet clearance before installation.
  2. Check the bowl depth and waste position against existing plumbing.
  3. Confirm cabinet width meets the minimum requirement for this sink size.
  4. Use the cut-out template included with the product for reference.

Complete specifications

Product type Single Bowl Kitchen Sink
SKU 43017
Code 43017
Size 490 x 440 x 180mm
Material 304 Stainless Steel
Colour / finish Stainless Steel
Mounting Topmount / Undermount / Inset (Check installation requirements)
Barcode 43017

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Rinse and dry after each use to prevent water marks.
  • Avoid abrasive cleaners or scouring pads on the surface.
  • Check for any loose parts after installation.

FAQ

Does this sink include the waste and accessories?

This sink includes the product unit and a basket waste. Rubber seals and mounting clips are not included and must be purchased separately.

Do I need to confirm the cut-out size?

Yes. Confirm the benchtop cut-out and cabinet clearance before installation. Always use the physical product measurements for cut-outs as the template may differ from the actual product dimensions over time.

Is a tap hole pre-drilled?

No. This sink does not have a pre-drilled tap hole. Select your preferred tap hole configuration at the time of installation.