Barcode:
43777
MyDepot product guide
Ruki Gunmetal Wall Basin Mixer Lead Free
A wall-mounted basin mixer in gunmetal grey. Designed for bathroom wall installations.
Size
192 x 215 x 73.5mm
Installation
Wall Mounted
Material
Brass
Finish
Gunmetal Grey
Quick check before ordering
Confirm wall cavity depth suits the wall mixer rough-in.
Check stud or wall backing is in place before tiling.
Verify water pressure is within 150-500 kPa.
Confirm basin tap hole or wall spout position.
Use a licensed plumber for installation.
What is included
| Included | Product unit and spout |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Bathroom wall installations where a wall-mounted basin mixer is preferred. |
Measure before you buy
- Measure the wall cavity depth for the rough-in body.
- Confirm stud or wall backing is at the correct position.
- Check the spout reach suits your basin.
- Verify the plate and escutcheon will clear finished wall surface.
- Allow clearance for maintenance access.
Complete specifications
| Product type | Wall Basin Mixer |
|---|---|
| SKU | 43777 |
| Code | 43777 |
| Size | 192 x 215 x 73.5mm |
| Material | Brass |
| Colour / finish | Gunmetal Grey |
| Mounting | Wall Mounted |
| Barcode | 43777 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a mild detergent and soft cloth only.
- Do not use abrasive, cream or citrus-based cleaners.
- Avoid products containing chloride or halides.
- Do not exceed 70 degrees Celsius operating temperature.
- Confirm water pressure with your installer before fitting.
FAQ
Is this mixer WELS rated?
Yes. This mixer carries a WELS 5 Star 5L/min rating (T38232).
What cartridge does this mixer use?
It uses a 35mm cartridge. Confirm your plumber has the correct replacement parts for servicing.
What water pressure does this mixer require?
This mixer is rated for 150-500 kPa. Confirm your system is in range before installation.
Specifications
| Color | Gunmetal Grey |