Skip to Content

Round Chrome ABS Toilet Bidet Spray Kit With 304 Stainless Steel Hose

A wall-mounted bidet spray kit in ABS plastic with chrome plating, fitted with a 1. 2m 304 stainless steel hose.

Size 32mm
Installation Wall mounted
Material ABS plastic, chrome plated
Finish Chrome plated
18.33 43.64
48.00

  • Color

Barcode: 70053
Barcode 70053

MyDepot product guide

A wall-mounted ABS chrome bidet spray kit with 304 stainless steel hose.

A wall-mounted bidet spray kit in ABS plastic with chrome plating, fitted with a 1. 2m 304 stainless steel hose.

Size 32mm
Installation Wall mounted
Material ABS plastic, chrome plated
Finish Chrome plated
Quick check before ordering
Confirm the wall mounting position suits your toilet layout. Check that your water inlet has a compatible angle valve or stop tap. Verify the 1.2m hose length reaches the supply point without tension. Confirm the 32mm inlet connection suits your plumbing. Turn off the water supply after each use to reduce pressure buildup.

What is included

Included Hand sprayer, shower holder, and 1.2m 304 stainless steel hose.
Not included Angle valve, stop tap, mounting hardware, and installation parts are not included.
Best for Personal hygiene spray use in toilet areas with standard wall plumbing connections.

Measure before you buy

  1. Measure from the wall water inlet to the desired sprayer position.
  2. Confirm the 1.2m hose length reaches the supply point comfortably.
  3. Check the wall fixing position before drilling.
  4. Verify the hose inlet thread is compatible with your angle valve.

Complete specifications

Product type Toilet bidet spray kit
SKU 70053
Code BSK01.CH
Size 32mm
Material ABS plastic, chrome plated
Colour / finish Chrome plated
Mounting Wall mounted
Barcode 70053

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Wipe chrome surfaces with a soft damp cloth and dry after use.
  • Avoid abrasive cleaners or scouring pads on the chrome finish.
  • Turn off the water supply after use to prevent pressure buildup in the hose.
  • Inspect the 304 stainless steel hose periodically for signs of wear or kinking.

FAQ

Does this kit include a water inlet valve or angle valve?

No. The kit includes the sprayer, holder, and hose only. A compatible angle valve or stop tap must be sourced separately.

What is the hose made of?

The hose is 304 stainless steel, which offers good corrosion resistance for cold and warm water supply lines.

How do I install the spray holder?

Fix the holder to the wall at a comfortable height near the toilet using appropriate wall anchors and screws. Confirm the wall type and use suitable fixings for secure mounting.

Specifications

Color Chrome