Skip to Content

1500*750*590mm Venice Freestanding Gloss White Bathtub Without Overflow

No overflow fitted - confirm your water depth needs This bath has no overflow. You must manage water level carefully to prevent spillage onto the floor.

A 1500 by 750 by 590mm freestanding acrylic bathtub with a gloss white finish. The no-overflow design means you control the water depth within safe limits to prevent floor spillage.

Size 1500 x 750 x 590mm
Material Acrylic
Finish Gloss White
SKU / Code 50199 / 50199
3,000.00 3,000.00
3,300.00


Barcode: 50199
Barcode 50199

MyDepot product guide

A 1500mm freestanding gloss white acrylic bathtub without overflow.

A 1500 by 750 by 590mm freestanding acrylic bathtub with a gloss white finish. The no-overflow design means you control the water depth within safe limits to prevent floor spillage.

Size 1500 x 750 x 590mm
Material Acrylic
Finish Gloss White
SKU / Code 50199 / 50199
Quick check before ordering
Confirm the bath fits through all doorways and corridors. Check the floor structure can bear the load when filled with water. Keep water depth below the rim to prevent spillage. Select a compatible popup waste fitting. Confirm mixer tap requirements.

What is included

Included Bathtub unit only.
Not included Waste, mixer tapware, overflow fitting and installation hardware are not included unless stated.
Best for Renovation projects where a simple freestanding bath with no overflow is acceptable.

Measure before you buy

  1. Measure all doorways, hallways and any tight passages for delivery access.
  2. Confirm the floor structure and loading capacity for a filled bathtub.
  3. Confirm the waste and plumbing position aligns with your existing setup.
  4. Check overall height of 590mm against your bathroom clearance.
  5. Record waste centre for plumber and installer reference.

Complete specifications

Product type Freestanding bathtub
SKU 50199
Code 50199
Size 1500 x 750 x 590mm
Material Acrylic
Colour / finish Gloss White
Barcode 50199

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Wipe the surface dry after each use to reduce water spotting.
  • Use only non-abrasive cleaners safe for acrylic.
  • Avoid harsh scrubbers or abrasive pads on the gloss finish.
  • Do not use very hot water directly on the acrylic surface.
  • Check with the manufacturer for recommended cleaning products.

FAQ

What happens if I fill the bath above the rim?

There is no overflow fitted, so water above the rim will run onto the floor. Keep the water level below the rim to prevent this. You control the safe fill depth yourself.

What type of waste fitting do I need?

Standard popup or pop-up waste fittings are compatible. Confirm the waste type with your plumber and check whether it is listed as included or purchase it separately.