?unique=412a238&nocache=mydepot_wm_blue_soft)
Barcode:
42053
MyDepot product guide
Muses Ezy Flow 100x100mm Brushed Gold Tile Insert Grate
A 100x100mm brushed gold tile insert floor grate with a 50mm waste outlet. Designed for custom-cut installations in bathrooms and wet areas.
What is included
| Included | 100x100mm Floor Grate Unit |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Bathroom floor drainage installations where a 50mm waste outlet is required and a tile-insert finish is desired. |
Measure before you buy
- Check that the waste outlet is 50mm diameter at the connection point.
- Confirm the floor cut-out is suitable for the 100 x 100mm grate.
- The grate is cut from a standard 5600mm length to suit your specified size.
- Verify floor level and slope for effective drainage.
- Check overall height of 26mm against finished floor thickness.
Complete specifications
| Product type | Floor Grate |
|---|---|
| SKU | 42053 |
| Code | 42053 |
| Size | 100 x 100 x 26mm |
| Material | Anodised Aluminium |
| Colour / finish | Brushed Gold |
| Mounting | Tile Insert |
| Barcode | 42053 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a soft cloth and mild non-abrasive cleaner.
- Avoid acidic or harsh chemical cleaners that may affect the Brushed Gold surface.
- Rinse thoroughly after cleaning.
- Inspect and clear the waste regularly to maintain flow.
FAQ
What is the difference between the grate size and the waste outlet size?
The grate footprint is 100 x 100mm. The waste outlet that connects to the plumbing is 50mm. These are two separate measurements. Confirm the 50mm outlet size matches your plumbing before ordering.
Can the floor grate be trimmed or cut down?
This product is supplied as a custom-cut unit from a standard 5600mm length. It is pre-cut to the 100x100mm size specified. Please ensure you order the correct size for your opening.
What tools or parts do I need for installation?
You will need a licensed plumber to connect the grate to your waste plumbing. Confirm that your waste pipe is the correct 50mm diameter and that the floor structure is prepared before fitting.