Barcode:
56682
MyDepot product guide
360 Degree Rotating Vanity Space Saver Trap
A flexible rotating trap designed for above counter basins. Maximises under-sink shelf space by allowing the trap to sit flat against the rear of the cabinet.
What is included
| Included | Rotating trap component |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Above counter and vessel basins where maximizing cabinet shelf space is required. |
Measure before you buy
- Confirm the basin waste outlet diameter matches the trap inlet
- Measure the clearance between the basin underside and the trap
- Check the drain outlet centre and set-out
- Verify the trap rotates freely without interfering with the basin or cabinet
Complete specifications
| Product type | Rotating Basin Trap |
|---|---|
| SKU | 56682 |
| Code | 56682 |
| Material | ABS |
| Colour / finish | White |
| Barcode | 56682 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Avoid chemical cleaners that may degrade ABS plastic
- Rinse with clean water after installation to clear residue
- Check seals for leaks after first use
- Do not over-tighten the trap during installation
- Use a licensed plumber for final connection to the drain system
FAQ
What basin types is this trap designed for?
This trap is designed for above counter and vessel basins. It is not suitable for undermount, inset, or bench-mounted installations.
How does the 360-degree rotation help?
The rotating design allows the trap to be aligned flexibly with the drain outlet, enabling it to sit closer to the rear of the cabinet to maximize available shelf space.
Can this trap be used with a P-trap wall drain?
This rotating trap connects to the basin waste; please confirm your specific outlet configuration matches your drain system type before ordering.