?unique=0b8bc21&nocache=mydepot_wm_blue_soft)
?unique=0b8bc21&nocache=mydepot_wm_blue_soft)
MyDepot product guide
A 110 by 110 by 20mm brushed brass grill floor waste for shower and wet-area drains.
A square floor waste with a brushed brass finish, grill pattern, and 80mm outlet. The 20mm depth suits shower and wet-area floor drainage where a flush-level grate is needed.
Size
110 x 110 x 20mm
Material
Brass
Finish
Brushed brass
SKU / Code
41403 / 41403
Quick check before ordering
Confirm the floor waste flange type matches your drain configuration.
Check the 80mm outlet size matches your waste pipe.
Verify adequate fall toward the waste before tiling.
Confirm floor thickness at the drain position suits the 20mm grate depth.
What is included
| Included | Product unit only. |
|---|---|
| Not included | Installation service, plumbing connectors and site preparation are not included unless stated separately. |
| Best for | Shower floors and wet areas where a flush-level brass floor waste is preferred. |
Measure before you buy
- Measure the floor flange and confirm it sits flush with the finished floor.
- Check the 80mm outlet size against the waste pipe before installation.
- Confirm floor thickness at the drain position.
- Plan for adequate fall toward the waste before tiling.
Complete specifications
| Product type | Floor waste / shower grate |
|---|---|
| SKU | 41403 |
| Code | 41403 |
| Size | 110 x 110 x 20mm |
| Material | Brass |
| Colour / finish | Brushed brass |
| Barcode | 41403 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean the waste grate regularly to prevent blockages.
- Use a soft brush to remove debris from the grill openings.
- Wipe the brushed brass surface with a soft cloth to maintain the finish.
- Avoid abrasive or acidic cleaners that may damage the brass finish.
FAQ
What is the outlet size of this shower grate?
This floor waste has an 80mm outlet. Confirm your waste pipe size and any required reducer before installation.
What is the depth of this shower grate?
The grate is 20mm deep. Confirm your floor build-up height at the drain position suits this depth before tiling.
Can this be used in a tiled shower floor?
Yes, it is designed to sit flush with tiled or screed floor finishes. Confirm the floor build-up height at the drain position before tiling.
Specifications
| Color | Brushed Gold |