Skip to Content

Round Brushed Nickel ABS Toilet Bidet Spray Kit With Stainless Steel Hose

Installation Requirement Confirm water inlet connection before installation. A water stop tap or angle valve is required for installation and is not included.

A practical bidet spray kit featuring a brushed nickel finish and durable ABS construction. Includes a stainless steel hose for targeted hygiene.

Size 150 x 33.7mm
Material ABS
Finish Brushed Nickel
SKU / Code 41473 / 41473
129.09 129.09
142.00


Barcode: 41473
Barcode 41473

MyDepot product guide

Round Brushed Nickel ABS Toilet Bidet Spray Kit

A practical bidet spray kit featuring a brushed nickel finish and durable ABS construction. Includes a stainless steel hose for targeted hygiene.

Size 150 x 33.7mm
Material ABS
Finish Brushed Nickel
SKU / Code 41473 / 41473
Quick check before ordering
Confirm your toilet has a suitable water inlet for the bidet hose. Check that a water stop tap or angle valve is available for installation. Confirm the connection size matches your plumbing. Verify the spray height is suitable for your toilet bowl.

What is included

Included Bidet spray head 1.2m stainless steel hose ABS shower holder
Not included Installation service and site preparation are not included unless stated separately.
Best for Targeted wash use in Australian toilet installations with compatible plumbing.

Measure before you buy

  1. Confirm the water inlet position relative to the toilet.
  2. Check the hose reach is sufficient from inlet to spray position.
  3. Measure the mounting height of the spray holder above the toilet.

Complete specifications

Product type Bidet spray kit
SKU 41473
Code 41473
Size 150 x 33.7mm
Material ABS
Colour / finish Brushed Nickel
Barcode 41473

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • After each use, turn off the water stop tap or angle valve to prevent pressure buildup.
  • Wipe the spray head with a soft damp cloth.
  • Avoid abrasive or acidic cleaners that may damage the brushed nickel finish.
  • Periodically check the hose and connections for leaks.

FAQ

What is included with this bidet spray kit?

This kit includes the bidet spray head, a 1.2m stainless steel hose, and an ABS shower holder. A water stop tap or angle valve is required for installation and is not included.

How do I operate the bidet spray safely?

After using the sprayer, always turn off the water stop tap or angle valve to prevent pressure buildup, which could lead to leaks over time.

What connection size does this require?

Confirm the connection size and water inlet type against your plumbing before ordering. A standard 1/2 inch connection is common for Australian installations.