MyDepot product guide
Solid Brass Black Toilet Bidet Spray Diverter (1 Inlet, 2 Outlets)
A solid brass matte black diverter with one G 1/2 inch inlet and two independently controlled outlets. Designed for toilet and bathroom installations requiring a single water feed split to two points.
Size
108 x 93mm
Installation
Wall mounted (via plumbing connections)
Material
Solid Brass
Finish
Matte Black
Quick check before ordering
Confirm G 1/2 inch connection compatibility with your plumbing.
Check that a single inlet feed is suitable for your intended use.
Confirm two outlets will be used in your installation.
Use a licensed plumber for plumbing and pressure testing.
What is included
| Included | Bidet spray diverter unit only |
|---|---|
| Not included | Installation service is not included unless stated separately. |
| Best for | Toilet and bathroom installations where one inlet feeds two separate outlets, such as a bidet spray and a secondary water point. |
Measure before you buy
- Confirm the G 1/2 inch inlet connection size before ordering.
- Check that the two-outlet layout suits your installation.
- Measure the 108 x 93mm body against available mounting space.
- Confirm clearance around both outlet positions for the dual control handles.
Complete specifications
| Product type | Bidet Spray Diverter |
|---|---|
| SKU | 41330 |
| Code | 41330 |
| Size | 108 x 93mm |
| Material | Solid Brass |
| Colour / finish | Matte Black |
| Mounting | Wall mounted (via plumbing connections) |
| Barcode | 41330 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a soft cloth and mild non-abrasive cleaner.
- Avoid harsh chemicals or abrasive pads on the matte black finish.
- Periodically check all connections for leaks.
FAQ
Can both outlets be used at the same time?
Yes. The dual control Biswitch system allows each outlet to be operated independently without affecting the other.
What is the connection thread size?
The connector is G 1/2 inch. Confirm compatibility with your plumbing and any hoses before ordering.
Are separate hot and cold inlet lines required?
This diverter has one inlet. Confirm your installation setup before ordering to ensure one inlet feed is suitable for your intended use.
Specifications
| Color | Matte Black |