Skip to Content

Linie Squareneck Sink Mixer Brushed Nickel

Quick check before ordering Confirm plumbing rough-in and bench hole size before installation. Check water pressure is within 150-500 kpa range. Use a licensed plumber for installation.

A modern kitchen sink mixer featuring a squareneck design and durable brass construction.

Size 235 x 50 x 380mm
Material Brass
Finish Brushed Nickel
SKU / Code 44633 / 44633
525.45 525.45
578.00

  • Color

Barcode: 44633
Barcode 44633

MyDepot product guide

Linie Squareneck Sink Mixer in Brushed Nickel

A modern kitchen sink mixer featuring a squareneck design and durable brass construction.

Size 235 x 50 x 380mm
Material Brass
Finish Brushed Nickel
SKU / Code 44633 / 44633
Quick check before ordering
Confirm bench hole size matches the mixer body diameter. Check the reach of 235mm suits your sink configuration. Verify clearance under any overhead cabinets. Allow adequate working space for the 380mm height.

What is included

Included Tapware unit Flexible hoses
Not included Installation service and site preparation are not included unless stated separately.
Best for Kitchen sinks where a squareneck mixer in brushed nickel finish is desired.

Measure before you buy

  1. Confirm bench hole size matches the mixer body diameter.
  2. Check the reach of 235mm suits your sink configuration.
  3. Verify clearance under any overhead cabinets.
  4. Allow adequate working space for the 380mm height.

Complete specifications

Product type Sink Mixer
SKU 44633
Code 44633
Size 235 x 50 x 380mm
Material Brass
Colour / finish Brushed Nickel
Barcode 44633

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean with mild soapy water and a soft cloth only.
  • Avoid abrasive, cream-based or citrus cleaning products.
  • Rinse thoroughly after cleaning to prevent spots and streaks.
  • Do not use cleaning products containing chloride or halides.

FAQ

What pressure range does this mixer need?

This mixer is rated for 150-500 kpa working pressure. Confirm your water pressure falls within this range before ordering.

Can I install this mixer myself?

This product should be installed by a licensed plumber. Confirm rough-in requirements and bench preparation before booking installation.

What is the cartridge size?

This mixer is equipped with a 25mm Kerox cartridge.

Specifications

Color Brushed Nickel