Barcode:
40043
MyDepot product guide
A standard kitchen sink mixer tap in chrome finish.
A standard kitchen sink mixer tap in chrome finish with a curved spout design. Made for kitchen use where standard water pressure applies.
What is included
| Included | Mixer tap unit only. Washers and O-rings are typically included. |
|---|---|
| Not included | Braided hoses, Teflon tape, isolating valves, and plumbing fittings are not included unless stated separately. |
| Best for | Kitchen sink use where a standard mixer suits the configuration. |
Measure before you buy
- Check the spout reach from the mounting hole to the bowl.
- Verify the benchtop mounting hole diameter.
- Confirm clearance above and below the tap.
- Measure from the wall or cabinet edge to the tap centre.
Complete specifications
| Product type | Kitchen sink mixer tap |
|---|---|
| SKU | 40043 |
| Code | 40043 |
| Size | 42 x 9 x 7.5 cm mm |
| Material | Stainless steel |
| Colour / finish | Chrome |
| Barcode | 40043 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Wipe clean with a soft cloth and mild soap.
- Avoid abrasive cleaners or chemical products on the chrome surface.
- Check connections periodically for leaks.
- Do not use the tap as a handle or support.
FAQ
What does this mixer tap include in the box?
The mixer tap unit is included. Washers and O-rings are typically included. Braided hoses and plumbing fittings are not included unless stated separately.
Do the connections suit Australian standard plumbing?
The mixer uses standard fittings. Confirm hose thread sizes and water line positions with a licensed plumber before installation.
Can this tap be installed in place of an existing mixer?
Yes, if the mounting hole size and positions are compatible. Measure the existing hole and check reach and height before replacing.