Skip to Content

Vanity Space Saver Universal Basin P-Trap

Check Trap Type Before Ordering This is a P-trap configuration. Please confirm your basin installation requires a P-trap and not an S-trap before purchasing.

A universal P-trap designed for vanity and space-saver basins. Connects the basin waste to a wall-mounted drain outlet.

Installation Wall-mounted drain outlet
Material PVC
Finish White
SKU / Code 56681 / 56681
43.64 43.64
48.00


Barcode: 56681
Barcode 56681

MyDepot product guide

Universal Basin P-Trap for Vanity and Space-Saver Basins

A universal P-trap designed for vanity and space-saver basins. Connects the basin waste to a wall-mounted drain outlet.

Installation Wall-mounted drain outlet
Material PVC
Finish White
SKU / Code 56681 / 56681
Quick check before ordering
Confirm your installation uses a P-trap configuration Measure the set-out distance from the wall to the drain outlet centre Check that the basin waste inlet height matches this trap Do not use with S-trap configurations or standard toilet pans

What is included

Included P-trap component
Not included Installation service and site preparation are not included unless stated separately.
Best for Vanity basins and space-saver basins using a P-trap configuration with a wall drain outlet.

Measure before you buy

  1. Measure the set-out distance from the wall face to the drain outlet centre.
  2. Confirm the basin waste inlet height aligns with the trap inlet.
  3. Check the trap reach suits the basin depth and vanity clearance.
  4. Verify the trap type matches the installation configuration.

Complete specifications

Product type Basin P-Trap
SKU 56681
Code 56681
Material PVC
Colour / finish White
Mounting Wall-mounted drain outlet
Barcode 56681

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Avoid chemical drain cleaners that may damage PVC components.
  • Rinse with clean water if residue builds up in the trap.
  • Check seals periodically for leaks after installation.
  • Do not over-tighten plastic fittings during installation.
  • Use a licensed plumber for final connection to the drain system.

FAQ

Is this trap suitable for an S-trap installation?

No. This trap is designed for a P-trap configuration with a wall drain outlet. Do not use with S-trap or floor drain configurations.

Can this trap be used with an above-counter basin?

This trap is listed for vanity and space-saver basins. Confirm compatibility with your specific basin type and installation configuration.