Barcode:
50115
MyDepot product guide
Compact Above Counter Round Ceramic Basin
A compact round basin designed for bathroom vanities and benchtops with limited space. Ideal for powder rooms and ensuites.
What is included
| Included | Basin unit |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Compact bathrooms, powder rooms and ensuites where a round above-counter basin is preferred. |
Measure before you buy
- Confirm the vanity or benchtop cut-out diameter is at least 310mm to accept the 305mm basin.
- Measure from the counter surface to confirm 110mm clearance for your mixer height.
- Confirm the waste hole matches a standard 32mm waste fitting.
- Check the waste position aligns with the vanity cabinet or plumbing below.
Complete specifications
| Product type | Above counter round basin |
|---|---|
| SKU | 50115 |
| Code | 50115 |
| Size | 305 x 305 x 110mm |
| Material | Ceramic |
| Mounting | Above counter |
| Barcode | 50115 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Clean with a soft cloth and mild non-abrasive cleaner.
- Avoid harsh chemicals or abrasive cleaners on the ceramic surface.
- Check the seal around the base of the basin annually to prevent water damage to the benchtop.
- Above-counter ceramic basins are not designed to withstand heavy impacts.
FAQ
Will this basin fit a standard bathroom vanity?
The basin is 305mm in diameter. Confirm your vanity or benchtop cut-out is at least 310mm to allow for installation and sealing. Check the mixer clearance height before ordering.
Does this basin have a standard waste hole?
The waste hole is a standard 32mm size. Confirm your waste fitting and plumbing are compatible before installation.
Is this basin drilled for tapware?
This basin is designed for above-counter installation; confirm tap hole requirements with your plumber or benchtop manufacturer to ensure compatibility with your chosen mixer.