MyDepot product guide
490 x 390 x 170mm Undermount Rectangular Basin with Mixer Hole
A rectangular undermount basin designed for installation below a benchtop or vanity cutout. Includes a pre-drilled mixer tap hole.
Size
490 x 390 x 170mm
Installation
Undermount
SKU / Code
50101 / 50101
Quick check before ordering
Confirm vanity cabinet interior clearance is at least 490 x 390mm
Check benchtop cut-out dimensions
Confirm mixer hole size suits the selected tap
Check waste hole position and size aligns with plumbing
What is included
| Included | Basin unit |
|---|---|
| Not included | Installation service and site preparation are not included unless stated separately. |
| Best for | Vanity cabinet installations and bathroom benchtops where the basin sits below the counter surface. |
Measure before you buy
- Measure the vanity cabinet interior width and depth
- Confirm the benchtop cut-out is approximately 490 x 390mm
- Check the 170mm basin depth fits the cabinet space
- Confirm waste hole position and mixer hole diameter
Complete specifications
| Product type | Undermount basin |
|---|---|
| SKU | 50101 |
| Code | 50101 |
| Size | 490 x 390 x 170mm |
| Mounting | Undermount |
| Barcode | 50101 |
Factory-direct confidence
MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.
Care and installation notes
- Seal the rim area to prevent water penetration below the benchtop
- Use non-abrasive cleaners only
- Inspect the rim seal regularly
- Do not overtighten undermount clips
FAQ
Does this basin include a tap and waste?
No. The basin is supplied alone. Select a compatible mixer tap, waste fitting and mounting supplies separately.
What is the installation method for this basin?
Undermount installation beneath a benchtop or into a vanity cabinet cutout, where the rim mounts from below the counter surface.
What cabinet or cut-out size is needed?
The basin requires a cut-out of approximately 490 x 390mm. Confirm your benchtop or vanity cabinet has adequate clearance for the basin and waste plumbing.